Bike world GEN3 reflashed plus full exhaust

[mark3evo]

found this in Ecu editor

 

[MikaS]

That launch control allows you to start with full throttle, but does not prevent doing the somersault.

 

First thing you got to do is take your bike into living room and connect to laptop.

Then call JD and ask what next.

[mark3evo]

28 minutes ago, MikaS said:

That launch control allows you to start with full throttle, but does not prevent doing the somersault.

 

First thing you got to do is take your bike into living room and connect to laptop.

Then call JD and ask what next.

have any of your busas had that fitted ?

[MikaS]

5 minutes ago, mark3evo said:

have any of your busas had that fitted ?

No, i am not that much into drag racing.

 

[JOHN-DYNOSTAR]

https://www.woolichracing.co.uk/products/suzuki/gsx1300r-hayabusa/2011/417/2008-2020-suzuki-gsx1300r-hayabusa-launch-control-key.aspx

see here

the video you posted illustrates it very well 

you hold the throttle flat out  engine is on  (your)  preset rev limiter which is released when you release the clutch 

I think you can set how fast the release speed is  :-)

[mark3evo]

1 hour ago, JOHN-DYNOSTAR said:

https://www.woolichracing.co.uk/products/suzuki/gsx1300r-hayabusa/2011/417/2008-2020-suzuki-gsx1300r-hayabusa-launch-control-key.aspx

see here

the video you posted illustrates it very well 

you hold the throttle flat out  engine is on  (your)  preset rev limiter which is released when you release the clutch 

I think you can set how fast the release speed is  :-)

ah i forget it needs the gear dog crunching quick shifter 

i don't think i'll bother, my gearbox now is as smooth as smooth can be 

[JOHN-DYNOSTAR]

no it does not need a quickshifter . it needs the app as its part of it . 

its a purchase option .

[mark3evo]

1 hour ago, JOHN-DYNOSTAR said:

no it does not need a quickshifter . it needs the app as its part of it . 

its a purchase option .

£175 - i'll think about it 

[MikaS]

6 minutes ago, mark3evo said:

£175 - i'll think about it 

What does cost £175 ?

I have not used it but i thought it was just a flash and its on, maybe not.

 

[mark3evo]

2 minutes ago, MikaS said:

What does cost £175 ?

I have not used it but i thought it was just a flash and its on, maybe not.

 

you need the woolich launch control box - set the presets

 

products / suzuki / gsx1300r-hayabusa / 2011

2008-2015 Suzuki GSX1300R Hayabusa Launch Control Key

Launch Control is part of the our Race Tools Package. It allows you to set a Launch RPM and also Ramp Parameters to assist with getting fast consistent launches from your bike, all controlled by the stock ECU.

If you already have a Quickshifter or Air Shifter installed on your bike or you only need the Launch Control function you can purchase this Launch Control Key. The Launch Control Key allows you to enable the Launch Control for one ECU.
Woolich Racing Race Tools requires you to Write the ECU. It is not a stand alone product. You will need to use the relevant Woolich Racing Interface and Bin File Definition to enable and configure Race Tools and write to the ECU. You can purchase this as a package on the product page for your bike. If you do not have a Woolich Racing Interface you can also visit a Woolich Racing - Tuning Partner and have them install and configure the Race Tools (additional fees and charges will apply).

£175.00