mark3evo Posted November 14, 2022 Share Posted November 14, 2022 vid just shows a lot of whizzing around for 7 mins, 1 minute looking at VBOX datalogger results from a posh van to see how much quicker modded v stock 0-60 was 0.1 second quicker 2.74 1/4 mile stock bike 10.1 - modded he made over several runs one being 9.99 sec dont sound alot quicker but he said if feels much more powerful citing strong cross winds Quote Link to comment Share on other sites More sharing options...
MikaS Posted November 14, 2022 Share Posted November 14, 2022 Maybe its the usual, bike feels more powerful when the exhaust makes more noise. 0.1s difference can come by "mistake" Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 14, 2022 Author Share Posted November 14, 2022 1 hour ago, MikaS said: Maybe its the usual, bike feels more powerful when the exhaust makes more noise. 0.1s difference can come by "mistake" i think part3 vid said he made 193 hp at the dubious bike shop dyno he said there was an annoying side wind Quote Link to comment Share on other sites More sharing options...
JOHN-DYNOSTAR Posted November 15, 2022 Share Posted November 15, 2022 no dyno graphs to back it up ? Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 15, 2022 Author Share Posted November 15, 2022 26 minutes ago, JOHN-DYNOSTAR said: no dyno graphs to back it up ? if you recall video part 3 was at jordan's motorcycles and the operator did not show much it was all spinning dials on the virtual dashboard screen thingy the figure mentioned was 193 !!! no close up view but from a distance you can see the 2 graphs the difference don't seem big difference over stock Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 15, 2022 Author Share Posted November 15, 2022 if there was a 10-j15hp gain at top end i would have thought the 1/4 mile may have come done 0.2/0.3 secs with competent rider in the 1/4 (not me) actually he should have done a roll on 40 - 150mph in 4th stock and modded and measured, more repeatable but for the average punter viewer launch control pull away looks more impressive not hard to program this is what i found on the net VBOX image some guy in same gear Quote Link to comment Share on other sites More sharing options...
JOHN-DYNOSTAR Posted November 15, 2022 Share Posted November 15, 2022 you could have launch control on yours Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 15, 2022 Author Share Posted November 15, 2022 7 minutes ago, JOHN-DYNOSTAR said: you could have launch control on yours what bazazz or woolich ? i can see it now, 1st time i launch bike somersaults how do we bench test that would i be the 1st Guinea pig on a Gen2 your on the left i'm on the right Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 15, 2022 Author Share Posted November 15, 2022 so how does that work............ bike has no abs ring thing or axis monitoring found these "Testing some Hayabusa Gen2 Launch control system. Bike has everything stock except ecu. This done with Woolich racing box." https://youtu.be/w92d6fI6xWI and below Quote Link to comment Share on other sites More sharing options...
mark3evo Posted November 15, 2022 Author Share Posted November 15, 2022 ok i get it now just launch on your dyno Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.