mark3evo Posted July 17, 2021 Share Posted July 17, 2021 On 7/10/2021 at 4:00 PM, mark3evo said: yeah pretty sure , exhaust decat and map it will have more torque more power lower down faster than a Gen2 on the street another vid on his channel -1 on rear sprocket took 1 front caliper off front strapped and 160 /60 tyre fitted add back 1 O2 sensor with piggy back cable - add back lost 12hp 1/8 mile 6.09 120 mph Quote Link to comment Share on other sites More sharing options...
MikaS Posted July 17, 2021 Author Share Posted July 17, 2021 Was it a 120/60 front tyre ? I have good example when taking off the one front brake caliper, he will be fine with the 130mph on 1/8 mile, it seems there is quite short braking distance though, but going to 1/4 mile it becomes questionable, maybe not on stock gen3 , but lets see what modifications they make by time, Quote Link to comment Share on other sites More sharing options...
mark3evo Posted July 17, 2021 Share Posted July 17, 2021 1 hour ago, MikaS said: Was it a 120/60 front tyre ? I have good example when taking off the one front brake caliper, he will be fine with the 130mph on 1/8 mile, it seems there is quite short braking distance though, but going to 1/4 mile it becomes questionable, maybe not on stock gen3 , but lets see what modifications they make by time, yes a 120/60 lower the front another 12mm Quote Link to comment Share on other sites More sharing options...
mark3evo Posted July 17, 2021 Share Posted July 17, 2021 1 hour ago, mark3evo said: another vid on his channel -1 on rear sprocket took 1 front caliper off front strapped and 160 /60 tyre fitted add back 1 O2 sensor with piggy back cable - add back lost 12hp 1/8 mile 6.09 120 mph 1/4 mile approx 6.09 x 1.54 (using Chris Moore calculation) = 9.37 sec on sticky US drag lane does that sound right Mika ?? Quote Link to comment Share on other sites More sharing options...
MikaS Posted July 18, 2021 Author Share Posted July 18, 2021 I guess so, and when he get it stretched, it would be very low 9s, like the gen3 in other videos Quote Link to comment Share on other sites More sharing options...
mark3evo Posted July 31, 2021 Share Posted July 31, 2021 finally on dyno still stock ecu 185 hp 110 torque he is confident 200 hp is possible on pump gas and 115 torque once tweaked Quote Link to comment Share on other sites More sharing options...
mark3evo Posted August 3, 2021 Share Posted August 3, 2021 Moore racing 1/4 mile pump gas has 9.4 @ 150 mph with MR22 9.31 @ 152 mph Both with 41 rear sprocket and of course a prepped track Quote Link to comment Share on other sites More sharing options...
roddy Posted August 3, 2021 Share Posted August 3, 2021 Utterly pointless. Quote Link to comment Share on other sites More sharing options...
mark3evo Posted August 3, 2021 Share Posted August 3, 2021 1 hour ago, roddy said: Utterly pointless. just adding some bike posts been quite quiet on here Pretty quick though …I bet I couldn’t do 11 seconds with the grabby Gen2 clutch Quote Link to comment Share on other sites More sharing options...
Busa Harbour man Posted August 3, 2021 Share Posted August 3, 2021 24 minutes ago, mark3evo said: just adding some bike posts been quite quiet on here Pretty quick though …I bet I couldn’t do 11 seconds with the grabby Gen2 clutch I have a sub 10 ticket somewhere BHM Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.