MikaS Posted May 6, 2021 Share Posted May 6, 2021 Difference is so small at the finish line it can be caused by rider experience or size, Quote Link to comment Share on other sites More sharing options...
Busa Harbour man Posted May 6, 2021 Share Posted May 6, 2021 Bloke on the GenIII looks at lot bigger and has a shittier take-off BHM Quote Link to comment Share on other sites More sharing options...
mark3evo Posted May 6, 2021 Share Posted May 6, 2021 23 minutes ago, Busa Harbour man said: Bloke on the GenIII looks at lot bigger and has a shittier take-off BHM and still wins Quote Link to comment Share on other sites More sharing options...
ptolemyx Posted May 7, 2021 Share Posted May 7, 2021 Bloke on the gen3 is a pro drag racer bloke on gen2 is a circuit racer. Quote Link to comment Share on other sites More sharing options...
mark3evo Posted May 7, 2021 Share Posted May 7, 2021 1 hour ago, ptolemyx said: Bloke on the gen3 is a pro drag racer bloke on gen2 is a circuit racer. They should Have swapped bikes to make it fair Quote Link to comment Share on other sites More sharing options...
Kzin Posted May 7, 2021 Share Posted May 7, 2021 Shoulda been against a 'full power' gen I. Quote Link to comment Share on other sites More sharing options...
mark3evo Posted May 7, 2021 Share Posted May 7, 2021 1 minute ago, Kzin said: Shoulda been against a 'full power' gen I. should have had all 3 taking off together Quote Link to comment Share on other sites More sharing options...
Bazz Posted May 7, 2021 Share Posted May 7, 2021 19 hours ago, Busa Harbour man said: Bloke on the GenIII looks at lot bigger and has a shittier take-off BHM depends on the jockey Quote Link to comment Share on other sites More sharing options...
JOHN-DYNOSTAR Posted May 7, 2021 Share Posted May 7, 2021 what does reaction time 0.2 and -0.5 mean if as i keep saying the primary gear Ratio (clutch to crank) is different then the whole thing is bollocks because the gearing is different , so is the torque , and on certain Dyno's so is the power when compared. if the gearing is different then one bike will accelerate faster and go faster in a shorter distance. (check out the DD3 clutch housing. ) Quote Link to comment Share on other sites More sharing options...
mark3evo Posted May 7, 2021 Share Posted May 7, 2021 5 minutes ago, JOHN-DYNOSTAR said: what does reaction time 0.2 and -0.5 mean if as i keep saying the primary gear Ratio (clutch to crank) is different then the whole thing is bollocks because the gearing is different , so is the torque , and on certain Dyno's so is the power when compared. if the gearing is different then one bike will accelerate faster and go faster in a shorter distance. (check out the DD3 clutch housing. ) edit - we need 5 bikes doing same drag simultaneous to 180 mph GEN1/2/3 BUSA and GEN1/2 ZZR it will look good on youtube suzook say GEN3 got the best aeros Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.