Jump to content

Dead DUCK 3 , DD3, The new generation GEN 3


Recommended Posts

18 minutes ago, mark3evo said:

goes to find Mekin map you know the one with bottom lip out :lol:

so who has a 1441 power and torque curve they can post on here :tumbleweed:

Link to comment
Share on other sites

  • Replies 600
  • Created
  • Last Reply

Top Posters In This Topic

seems like a well ported head - makes 15 to 20 hp with nothing else no cams

Mika, John :tumbleweed:

 

Link to comment
Share on other sites

Bazz's motor was 1441 before the latest crank and I'm sure there were graphs posted but they may not have survived the updates. Bazz or John will probably have copies though. Mine was 1400 then 1600.

KJA and Bigfella also had 1441's if I remember right so there should be plenty comparison graphs.. somewhere.

Link to comment
Share on other sites

12 minutes ago, roddy said:

Bazz's motor was 1441 before the latest crank and I'm sure there were graphs posted but they may not have survived the updates. Bazz or John will probably have copies though. Mine was 1400 then 1600.

KJA and Bigfella also had 1441's if I remember right so there should be plenty comparison graphs.. somewhere.

as you say when UKB was rebuilt 2 years ago most of the images did nit copy across :(

Link to comment
Share on other sites

54 minutes ago, mark3evo said:

seems like a well ported head - makes 15 to 20 hp with nothing else no cams

Mika, John :tumbleweed:

 

 

Carpenter makes race head porting, put that head in and you will lose as much as gain in other spots.

Link to comment
Share on other sites

1 hour ago, mark3evo said:

so who has a 1441 power and torque curve they can post on here :tumbleweed:

 

I have some on paper but they cant be compared as they are EU standard graphs, and you are not in eu anymore  :beat:

Link to comment
Share on other sites

3 hours ago, enfabusa said:

That is SOME rear sprocket!:)

Get one on each side and it'll act as a stabilizer - which is just as well as I see fewer and fewer new riders coming through....

:hyper: 

Link to comment
Share on other sites

58 minutes ago, MikaS said:

 

Carpenter makes race head porting, put that head in and you will lose as much as gain in other spots.

the vid says could be marketing hype

gain 15hp ??

but maybe lose  torque/power mid range due to low gas speed  :huh:

Link to comment
Share on other sites

2 hours ago, mark3evo said:

as you say when UKB was rebuilt 2 years ago most of the images did nit copy across :(

They weren't there to be copied. Unfortunately the site before the update had become so outdated etc things were being lost. We tried hard to find all images but a good chuck are lost for good :(

 

Link to comment
Share on other sites

2 minutes ago, madmattt said:

They weren't there to be copied. Unfortunately the site before the update had become so outdated etc things were being lost. We tried hard to find all images but a good chuck are lost for good :(

 

lost like the dead sea scrolls

Link to comment
Share on other sites

  • JOHN-DYNOSTAR changed the title to Dead DUCK 3 , DD3, The new generation GEN 3

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy